To Study Magnetisation Characteristics of DC Shunt Generator.
STEP 1: Make connections as per the instructions given below:
From | R | B | B | B | F | A | H | C | D | E | G |
To | L | H | A2 | F2 | I | A1 | F1 | A3 | A4 | F3 | F4 |
NOTE: If wire is wrongly connected, Click on node number to detach the wire.
STEP 2: Click on button for checking the connections.
STEP 3: Click on MCB to turn on the supply.
STEP 4: Now, move the slider on the rheostat to take observations from Voltmeter and Ammeter.
STEP 5: Click on button to add values to the observation table.
STEP 6: Repeat steps 4 to 5 to add more values in the table.
STEP 7: Click on button to make a respective graph regarding the values in the table.
STEP 8: Click on button to print the webpage.
STEP 9: Click on button to reset the webpage.