STEP 1: Make connections as per the instructions given below:

From	R	B	B	B	F	A	G	I	C	A1	K
To	L	D	A2	F2	E	J	H	F1	A1	K	C

NOTE: If wire is wrongly connected, Click on node number to detach the wire.

STEP 2: Click on  Check  button for checking the connections.

STEP 3: Click on MCB to turn on the supply.

STEP 4: Now, move the second slider to get corresponding values of Voltmeter and Speedometer.

STEP 5: Click on  Add to Table  button to add values to the observation table.

STEP 6: Repeat steps 4 to 5 to add more values in table.

STEP 7: Click on  Graph  button to make a respective graph regarding the values in table.

STEP 8: Click on  Print  button to print the webpage.

STEP 9: Click on  Reset  button to reset the webpage.